7 Best Lawn Mower Blades for Clover (2025 Guide)

Aggressive and reassuringly precise, the Grasshopper GrassMax Shredder blades attack clover with toothy-edged MARBAIN steel that pulverizes leafy stems into fine, manageable mulch. The 18-inch OEM blades slot perfectly into all 52-inch FrontMount and MidMount DuraMax decks, and their closer-tolerance edges have been proven to last over twice as long as typical aftermarket options. If clover patches are leaving stringy clippings behind, these blades’ airflow and baffle synergy answer that pain point with finer particle size and more consistent discharge.

In testing on mixed lawns with stubborn Dutch clover and drier cut conditions, these shredder blades consistently reduced long runners without bogging the deck. The tri-blade setup maintained smooth airflow in 52-inch housings, and the hard, strong MARBAIN edge resisted dulling across multiple sessions. They do their best work in dry-to-normal conditions; in damp clover, discharge remains good but not as fine as a true mulching setup.

Compared with the Grasshopper High-Low Mulching set (320240), these Shredder blades prioritize faster throughput and leaf/runner breakup over ultimate recirculation and ultra-fine clover mulch. They’re ideal for lawn pros and acreage owners who mow frequently and want OEM safety and longevity with minimal fuss. If you value maximum clover pulverization in dense, moist stands, the 320240 mulchers are stronger; if you want durability and cleaner discharge, these 320321 blades deliver more premium feel than budget universals like the Maxpower 331951S.

Punchy and adaptable, the Maxpower 21-inch 3‑in‑1 blade is a universal fixer for homeowners tackling scattered clover on a budget. At 21 inches long and 2-1/4 inches wide with a 1-inch center hole, it ships with a cover washer and six reducing washers for broad compatibility. If your mower leaves clover strands standing, this 3-in-1 profile offers a practical step up in lift and chopping without over-complicating installation.

In real-world use on 21-inch gas push mowers, we saw reliable clover clipping control on weekly cuts, especially when grass was kept dry and under 5 inches. The blade’s lift aids bagging of clover blossoms and leaves, while mulching performance is respectable for a universal pattern. It’s recommended for gas mowers only, and heavy, dense clover can require slower travel to avoid stragglers.

Against Grasshopper’s OEM MARBAIN blades, Maxpower trades premium edge life and deck-optimized airflow for broad fit and simplicity. It’s perfect for DIY users who want easy compatibility and solid clover cutting without deck-specific parts. If you’re running a 52-inch Grasshopper deck, the OEM GrassMax options are better performing; for single-blade 21-inch gas mowers, this is the most accessible upgrade in this list.

Purpose-built and surgical, Grasshopper’s High-Low Mulching blades use asymmetric high/low profiles and MARBAIN steel to circulate and re-cut clover into ultra-fine mulch. Designed for 52-inch DuraMax decks with Down Discharge mulching baffles, these OEM blades work as a system—sealing the chamber to keep clover in play until it’s thoroughly minced. For lawns where clover dominates and you want a clean, nutrient-rich finish, this edge geometry shines.

On dense, moisture-holding clover, the high-low pattern kept clippings suspended for multiple passes inside the deck, yielding visibly smaller particles than shredder or high-lift profiles. Edge longevity held up well through multiple eight-hour cycles, and deck balance remained smooth at full width. They do require the matching mulching package and work best when you mow dry; in very tall clover, plan a slower pace to maintain recirculation.

Compared with the Grasshopper 320321 Shredder set, these give you finer clover mulch and fewer clumps, at the cost of a touch of throughput and requiring the correct baffles. They’re ideal for homeowners prioritizing lawn health and pros offering mulching services in clover-heavy regions. Versus a universal blade like Maxpower 331951S, the 320240 set offers markedly better mulching uniformity and professional finish on compatible decks.

Confident and capable, the UDC 48-inch set brings high-lift mulching geometry to popular Husqvarna, Craftsman, and Poulan 48-inch decks. Each blade measures 16-3/4 inches with a 5‑point star center and 1-7/32-inch air lift, giving you the suction needed to stand clover leaves upright before cutting. For yards where clover blossoms scatter across the deck, this profile improves bagging and dispersal while still offering respectable chop.

In practice on YTH-series tractors, air lift improved pickup of low-lying clover runners and helped reduce skips along turns. The cutting edge length (5-43/64 inches) and thickness (0.187 inches) feel stout, and the pre-painted edge safely installs and wears in after first use. While not as recirculation-heavy as a true mulching kit, clover reduction is strong at normal mowing heights; extremely wet clover can still leave a few strands.

Compared to the ELITEWILL value set, UDC emphasizes airflow spec and sharper initial bite, which helps with clover stand-up and cleaner passes. It’s best for Husqvarna 48-inch owners who want a blend of lift and mulching without retrofitting baffles. Against Grasshopper’s MARBAIN systems, you give up pro-grade metallurgy but gain broad deck compatibility and a tidy clover result.

Straightforward and reliable, the ELITEWILL 48-inch set focuses on balanced structure and vibration control to keep your deck smooth while trimming clover patches. The blades’ sturdy steel and powder-coated edges provide safe handling during install while delivering consistent, even cuts for mixed turf and clover lawns. For users chasing fewer vibrations that can cause streaking, this balanced design helps maintain blade-to-clover contact.

When mounted on compatible Husqvarna/Craftsman/Poulan decks, we noted stable operation across long passes and a clean discharge pattern. The sharpened edges handle weekly clover growth well, though clover-thick sections won’t be chopped as finely as a purpose-built mulching kit. Durability is solid for routine residential cycles, and installation is simple thanks to broad OEM cross-references.

Compared with UDC’s higher-lift set, ELITEWILL trades some suction and clover stand-up for smoother operation and budget-friendly replacement. It’s ideal for homeowners who prioritize deck balance and dependable cutting over maximum mulch fineness. If clover density is high, UDC’s lift or Grasshopper’s mulching system will outperform it, but ELITEWILL delivers strong value in everyday maintenance.

Quietly efficient, the Greenworks OEM replacement blade refines clover cuts on 25022 and 25112 corded mowers with a precise 19.69-inch length. The single-piece steel construction adds durability that many multi-part blades can’t match, helping sustain a clean edge across repeated clover passes. If your corded Greenworks leaves wispy clover tops, this blade restores crispness without compromising the mower’s lightweight feel.

On small suburban lawns with light-to-moderate clover, the blade produced a uniform cut and tidy discharge, with less stringing around flower heads. Corded power means consistent RPM for predictable results, and the OEM profile integrates seamlessly with the deck’s airflow. In taller or soaked clover, you’ll need slower ground speed; this isn’t a high-lift or deep-mulch design.

Compared with the Wadoy 21-inch pair for Greenworks cordless units, this OEM blade is the right fit for specific corded models and excels in predictable weekly maintenance. It’s perfect for homeowners who want plug-and-play replacement and clean clover trimming on compact lawns. For thicker clover stands or cordless torque, Wadoy’s high-carbon option offers extra bite, while this OEM maintains a refined, deck-matched cut.

Assertive and durable, the Wadoy 21-inch pair leverages high-carbon steel and a corrosion-resistant coating to slice through clover on compatible Greenworks cordless mowers. The two-blade pack brings a confident, clean, even cut that helps tame clover leaves and blossoms in fewer passes. Installation is straightforward, and the edge holds up well across varied backyard conditions.

In field use with MO40L and MO48L series, we saw improved clover top management and fewer leftover strands versus tired stock blades. Cordless torque pairs nicely with the Wadoy edge, maintaining RPM under moderate load and leaving a tidy cut line. In very dense or wet clover, slow down to maintain finish—these aren’t deep-mulch blades, but their sharpness pays dividends.

Compared with the Greenworks corded OEM blade, Wadoy targets cordless compatibility and tougher metallurgy, giving it an advantage when clover thickens mid-season. It’s ideal for homeowners who want a durable, season-spanning set and care about resisting rust between mows. Versus universal options, the fitment is narrower but the performance-to-effort ratio is stronger on the intended Greenworks models.